Wall Plate and Cable for VanTenna

$69.00

The wall plate provides a 12V power supply for your television and is also a powered COAX splitter. It comes with two TV outputs, allowing you to connect and watch two televisions at the same time. The on/off switch let you to select the input; Antenna or Satellite.

Why buy the TV wall plate?

Caravan television antennas are known as active antennas. This means that they require 12 volt power in order to receive a television signal. The Cowfish TV wall plate injects power through the COAX cable to the television antenna in order to power the amplifier and 4G filter.

Installation

Connect the black & red DC wires to your 12V power source. Use as a minimum 14 AWG wire.
Connect the antenna coaxial cable to “ANTENNA INPUT” F connector (#1) and tighten until finger tight. (The coax cable is to be routed through the ceiling and wall to the chosen wall plate location).
(OPTIONAL) Connect the Satellite TV cable to “SATELLITE TV INPUT” F connector (#2) and tighten until finger tight.
(OPTIONAL) If you have a second television outlet in your caravan, for instance an external entertainment hatch, connect the secondary TV outlet cable to “TV2 OUTPUT” F connector (#3) and tighten until finger tight.

Upgrading from an existing antenna

When upgrading your antenna to a new model, confirm if you already have a power injector and if this unit is a 12 volt device or 5 volt. The VanTenna, like most caravan antennas, requires 12 volt.