Cosmo Premium

$489.00

The perfect solution for powering your Starlink Dish whilst on the road.

Cowfish Technologies has developed this unique solution to operate your Starlink Gen 3 Dish from your 12V battery system, ensuring reliable and consistent connectivity even in the most remote locations. This removes the requirement to run an inverter to power the Starlink system, but instead powers the system directly for your caravan battery.

Our 12 volt Starlink solution does not only cater for those that do not have an inverter, they also use less power compared to a conventional 240V inverter setup powering the Starlink setup. This reduction in power usage allows you to stay off grid for longer.

The Cosmo Premium is the complete kit. It includes the Cosmo 12 volt power supply for your gen 3 Starlink system, a mounting bracket for your Starlink Router and the cables and connectors required to have a full weatherproof connection to the outside of your caravan.

Why buy the COSMO Premium?

For anyone who uses the Starlink Gen 3 system and wants to run their Starlink on 12 volt power we have developed COSMO. This is a dedicated power supply unit that replaces the standard Starlink power supply. COSMO plugs directly into the Starlink router, powering the entire Starlink setup through 12 volt. The unit also has its own ON/OFF switch, allowing you to completely turn the Starlink system off when not in use, in order to save power.
This Premium Kit incorporates a weatherproof connection point for on the outside of your caravan and all the required cables.
A specialised connector is installed on the end of the gen 3 Starlink cable, providing a full weatherproof connection to the Starlink dish. Wind, rain or hail, the Dish cable can be left plugged in without risking water getting into the electronics or getting inside the caravan.
The external connection point has an integrated cap and is rated IP65, meaning weatherproof and dust proof. This connection point can be mounted either on the outside wall of the caravan, or in the tunnel boot or media hatch, allowing for easy access to connect the Starlink Dish.
The kit also comes with an internal receptacle and two ethernet cables. The cables are shielded CAT6A cables to facilitate the electrical supply to the Starlink dish. The 1m or 6m ethernet cable connects the internal receptacle to the external receptacle. The 0.8m cable connects the Starlink Integration Kit or Starlink router to the internal receptacle.

Installation

COSMO is to be installed next to the Starlink router. Mount the unit next to the router and connect the power supply cable into the power point on the Starlink router. Connect COSMO to the caravans power supply. In order to supply adequate input power to COSMO, a minimum of 10 AWG (6.0 mm²) electrical wire is required.
The Premium package incorporates a weatherproof connection point for on the outside of your caravan. A specialised connector is installed on the outside of the caravan and another connector on the end of the Starlink cable, providing a full weatherproof connection.

Don't have Starlink yet?

Order your Starlink system here and get 1 month free.